Waist Trim on Riley Elf Mk111
2 posters
Page 1 of 1
Waist Trim on Riley Elf Mk111
When my elf was painted the panel shop people filled up and covered all the rivet holes for the waist trim strips, so now Im at a stage where Im going to put the trim strips on. My question is dose anybody know the hole positions/Location so I can redrill out the holes, I know its a hard question but I would rather try and find the holes rather than drill new ones ???? Ta Richard
moc99- Posts : 12
Points : 4007
Join date : 2013-07-01
Age : 77
Location : Brisbae Australia
Re: Waist Trim on Riley Elf Mk111
If the original hole have been welded then you would be advised to drill new. it will be easier as the weld will be harder to drill.
If filled with body filler than you may be better to rub off the excess filler inside the car, then open up the original holes but I guess you may find the holes too big for your rivets and may allow water ingress!
Good look and please let us know which method you use>
Tony
Admin
If filled with body filler than you may be better to rub off the excess filler inside the car, then open up the original holes but I guess you may find the holes too big for your rivets and may allow water ingress!
Good look and please let us know which method you use>
Tony
Admin
TONYELF- Admin
- Posts : 1743
Points : 7474
Join date : 2008-11-21
Location : Chester UK
Similar topics
» Waist trim
» waist line trim
» Waist Trim and other bits
» 1968 Elf automatic breaking for spares
» Riley Elf Mk111 Door Switch for inside light
» waist line trim
» Waist Trim and other bits
» 1968 Elf automatic breaking for spares
» Riley Elf Mk111 Door Switch for inside light
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|