Headlining rod Cups
Page 1 of 1
Headlining rod Cups
Has anyone found a good replacement for the little plastic cups that fit into roof side rails,the headlining rod sits into them.
Mine are 9.2 mm outside diameter, 17.5 mm long and top hat is 17.5 mm in Diameter
The nearest I can find is at Bresco
'Snapsac' sealing sleeve, for 8.5mm panel hole, depth 16.0mm. General application.
Ref: 12445P
Austin-Morris part no. BH2475
Standard-Triumph part no. 613769
LandRover part no. MWC9917
Larger image
Price: £7.49
Pack quantity: 30
Quantity: Pack These Might be near enough but It is always worth asking. Thanks.Paul.
Mine are 9.2 mm outside diameter, 17.5 mm long and top hat is 17.5 mm in Diameter
The nearest I can find is at Bresco
'Snapsac' sealing sleeve, for 8.5mm panel hole, depth 16.0mm. General application.
Ref: 12445P
Austin-Morris part no. BH2475
Standard-Triumph part no. 613769
LandRover part no. MWC9917
Larger image
Price: £7.49
Pack quantity: 30
Quantity: Pack These Might be near enough but It is always worth asking. Thanks.Paul.
elfsave- Posts : 57
Points : 5211
Join date : 2010-06-13
Age : 59
Location : Blackpool
Bought some inserts
Hi, Car nuts!
I ordered some and they work ok. Expensive way of doing it, but I could not find a bit of plastic pipe with a thin enough wall thickness to jam in the holes to do the same job.
I now have loads of spare ones as they come in packs of 30. Paul.
I ordered some and they work ok. Expensive way of doing it, but I could not find a bit of plastic pipe with a thin enough wall thickness to jam in the holes to do the same job.
I now have loads of spare ones as they come in packs of 30. Paul.
elfsave- Posts : 57
Points : 5211
Join date : 2010-06-13
Age : 59
Location : Blackpool
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|