Re-assembly
3 posters
Page 1 of 1
Re-assembly
My car is virtually in pieces right now, and soon the re-assembly will start.
Initially I will have to put on the two subframes so the car can move around in the workshop.
What would the correct sequence be.
My main concern is about brake lines, fuel lines, main battery cable and steering rack.
Initially I will have to put on the two subframes so the car can move around in the workshop.
What would the correct sequence be.
My main concern is about brake lines, fuel lines, main battery cable and steering rack.
reymondos- Posts : 179
Points : 5091
Join date : 2010-12-13
Location : Athens, Greece
Re: Re-assembly
Not sure about all of it but I think you have to fit the steering rack before the front subframe.
If it were my car I would run the fuel pipe first, then the steering rack, front to rear brake pipe (rough fit to get it round the subframe), fit the front sub frame, run the battery cable. But I'm damn sure I'll do it all differently when I get round to doing mine.....well nearly everything will run through the car :-)
If it were my car I would run the fuel pipe first, then the steering rack, front to rear brake pipe (rough fit to get it round the subframe), fit the front sub frame, run the battery cable. But I'm damn sure I'll do it all differently when I get round to doing mine.....well nearly everything will run through the car :-)
Zef- Posts : 140
Points : 5604
Join date : 2009-06-25
Age : 53
Location : Yorkshire
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|