Front panel for Mk III heater

Anyone got a spare plate that goes on the front of the heater (the bit the lever sticks through)- mine's just rattling aroun and only adjustable by sticking a rag in it to hold the flap back! I don't need the heater - just the front panel.

Any help in finding one is much appreciated.

I have a spare heater c/w plate off a MK1/2 If it is the same you can have it.

elfgirl wrote:Anyone got a spare plate that goes on the front of the heater (the bit the lever sticks through)- mine's just rattling aroun and only adjustable by sticking a rag in it to hold the flap back! I don't need the heater - just the front panel.

Any help in finding one is much appreciated.

Don't you just a couple of screws? Same thing happened on mine and that sorted it!

Jase

discoman41 wrote:

elfgirl wrote:Anyone got a spare plate that goes on the front of the heater (the bit the lever sticks through)- mine's just rattling aroun and only adjustable by sticking a rag in it to hold the flap back! I don't need the heater - just the front panel.

Any help in finding one is much appreciated.

Don't you just a couple of screws? Same thing happened on mine and that sorted it!

Jase

Whoever said I needed a good screw!!! Sorry Jase couldn't resist

Tony, I think you've got what I mean - Katy's got the whole plate missing- not just a screw loose!!- looks the same from the pic!! I'll PM my details- thanks for the offer -would be great if we can do a deal.

No problem I'll give you two screws as well!!!!!!!!!!!! (NO! that's not the deal!)

oooh-er missus! who lowered the tone? ah yes of course, had to be the oldest swinger in Glos!

little Katy elf is missing the whole front plate and elfgirl has been looking for one for a while now with no luck, so fingers crossed the problem may be solved!

hurrah!

Just to make sure that this is the one you want. Here is a photo of the plate. A bit tatty but hey! A bit of masking tape over the letters, a rub down and a coat of spray paint and you're away! BTW it's a three screw job!

Big_Al_Smith wrote:oooh-er missus! who lowered the tone? ah yes of course, had to be the oldest swinger in Glos!

little Katy elf is missing the whole front plate and elfgirl has been looking for one for a while now with no luck, so fingers crossed the problem may be solved!

hurrah!

Easy on there big Al!

I was being all innocent (for a change!) It was SJ who lowered the tone!!!

TONYELF wrote:Just to make sure that this is the one you want. Here is a photo of the plate. A bit tatty but hey! A bit of masking tape over the letters, a rub down and a coat of spray paint and you're away! BTW it's a three screw job!

Perfect!! I'm sure I kind find a loose screw somewhere!!

discoman41 wrote:

Big_Al_Smith wrote:oooh-er missus! who lowered the tone? ah yes of course, had to be the oldest swinger in Glos!

little Katy elf is missing the whole front plate and elfgirl has been looking for one for a while now with no luck, so fingers crossed the problem may be solved!

hurrah!

Easy on there big Al!

I was being all innocent (for a change!) It was SJ who lowered the tone!!!

As if I would!!

It's in the Post . First Class. You could get it Monday with a bit of luck!
And 71p????? I'll live!
Just buy me a coffee at at one of the shows. OK?

Ps. A little tip. These plates tend to rattle so put some insulation tape on the edge of the heater itself before screwing the plate on. It won't be seen.

Good tip - nice one Tony

TONYELF wrote:It's in the Post . First Class. You could get it Monday with a bit of luck!
And 71p????? I'll live!
Just buy me a coffee at at one of the shows. OK?

Ps. A little tip. These plates tend to rattle so put some insulation tape on the edge of the heater itself before screwing the plate on. It won't be seen.

Thanks you're a star - I'll get you a biscuit too!!

Ta.! I'll look forward to that!

It arrived safely yesterday morning . Thanks again Tony.... now where did I put that masking tape?

Glad to be of some help. Hope you can save the letters on the face of the plate just to finish it off.
PS the tape is where you left it the last time you used it! As always, you will find it when you are NOT looking for it